Ge 45138 Manuel d'utilisateur télécharger pdf (Page 7)

Step 3 - When the Signal Repeater receives the

conﬁrmation signal, the LED indicator will ﬂash,

ﬁve times. If the Signal Repeater does not receive

the conﬁrmation signal from the Control

Center, the LED indicator on the Signal Repeater will

not ﬂash. You will need to move the Signal Repeater

closer to the Control Center and retest.

Step 4 - To Ensure the Signal Repeater can receive

the signal from the Sensor, activate the Sensor. The

Signal Repeater’s LED indicator should ﬂash rapidly,

and the Control Center should respond to the

Sensor’s signal.

This process will help you locate the Signal Repeater

to the best (farthest) position from the Control

Center

in order to extend the range of the Sensor.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Ge 45138 Manuel d'utilisateur Page 7