Ge 60-883-95R Manuel d'utilisateur télécharger pdf (Page 24)

Medication Reminders

least once during the selected time period, no alarm will be sent. See “Adding/Replacing Sen-

sors” on page 20 for information on setting up sensors to work with Activity Check.

If activity is not detected within the Activity Check time period the system announces “activity

time warning, please press status” once a minute and the Status button will begin flashing. If the

system includes X10 controlled lights they will begin turning on and off 4 times a minute. If the

Status button is not pressed within 15 minutes the system will report a no activity alarm to the

monitoring station.

Home and Away

If you will be away from the CareGard system, it’s necessary to temporarily shut off the Activity

Check.

When you’re Away from home:

 Press the Power/Home/Away button. The system announces “Activity Check Off”. If Medi-

cation Reminders are scheduled they will be turned off as well and an additional announce-

ment will be made. The Power/Home/Away button will blink when the Activity Check is off.

When you return Home:

 Press the Power/Home/Away button. The system announces “Activity Check On”. If Medica-

tion Reminders are scheduled they will be turned on as well and an additional announcement

will be made.

Medication

Reminders

The CareGard system can be set up to remind the user they need to take medication. Up to 8

reminders can be set.

Setting up Medication Reminders

¾ To set a Medication Reminder:

1. Press the Menu button on the back of the panel until it announces “Medication Reminder,

press Status to select.”

2. Press the Status button on the front of the panel. The panel announces “Medication reminder

one time is off, press Power to change.”

Note

Pressing the volume button at any time when setting a medication reminder turns it off.

3. Press the Power button until you hear the correct time for the medication reminder. The time

starts at 6:00

A.M. and cycles through every half hour.

4. Repeat steps 2-3 for each reminder that needs to be set.

To turn a Medication Reminder off:

1. Repeatedly press the Menu button on the back of the panel until it announces “Medication

Reminder, press Status to select.”

2. Press the Status button on the front of the panel repeatedly until you hear the Medication

Reminder you need to turn off. The panel will announce the number and time of each Medi-

cation Reminder.

3. After the panel has announced the Medication Reminder you want to shut off, press the vol-

ume button and the panel will announce the number of the Medication Reminder and off.

Acknowledging Medication Reminders

When the medication reminder time arrives the panel will announce “Medication Reminder”

once a minute and the Status button will begin flashing. If the system includes X10 controlled

lights they will begin turning on and off 4 times a minute.

To acknowledge a Medication Reminder:

 Press the status button to acknowledge the medication reminder.

If the medication reminder is not acknowledged within 15 minutes the panel will immediately

report to any voice event notification or pager phone numbers programmed into the system. If

Option 40 is Off the monitoring station will also be called immediately. If Option 40 is on the

monitoring station will not be notified of the failure to acknowledge the medication reminder

until Supervisory Time. (See “Option 32: Supervisory Time” on page 16 and “Option 40: Report

Medication Failures at Supervisory Time” on page 17.)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 33 34

Commentaires sur ces manuels

Pas de commentaire

Ge 60-883-95R Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Sécurité Ge 60-883-95R