GE PNSF31Z01 Manuel d'utilisateur télécharger pdf (Page 12)

Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service

About the water softening system.

The timer computer has a self-diagnostic function for the electrical

system (except input power and water meter). The computer

monitors the electronic components and circuits for correct

operation. If a malfunction occurs, an error code appears in the

timer display.

The chart on

Error Codes

shows the error codes that could

appear and possible defects for each code. While an error code is

displayed, all timer buttons are inoperable except for the

SELECT

button.

SELECT

remains operational so the service person can make

the

Manually Initiated Electronic Diagnostics

to further isolate the

defect and check the water meter.

If electrical power to the water softening system is interrupted, the

time display is blank, but the timer keeps correct time for about six

hours. When power is restored, you have to reset the present time

only if the display is flashing. All other settings are maintained and

never require resetting unless a change is desired.

If the time is flashing after a long power outage, the water softening

system continues to work as it should to provide you with soft water.

However, regenerations may occur at the wrong time of day

until you reset the timer to the correct time of day.

Feature: Program Memory

Feature/Service: Automatic Electronic Diagnostics

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

GE PNSF31Z01 Manuel d'utilisateur Page 12