Ge 45610WB GE Z-Wave Add On Auxiliary Switch Manuel d'utilisateur télécharger pdf (Page 2)

This auxiliary switch is a component of the GE Z-Wave

lighting control system and is designed to work with the

45607 Dimmer (ZW3002), 45612 Dimmer (ZW3003) and

45609 On/Off Relay Switch (ZW4001). Use one auxiliary

switch for 3-way control such as the top and bottom of a

staircase (1 load/light & 2 switches) with one of the above

Z-Wave devices. Two or three auxiliary switches can be

used with these dimmers and switches to create a 4-way (1

load/light & 3 switches) or 5-way (1 load/light & 4 switches)

lighting system.

The 45610 auxiliary switch is not Z-Wave enabled

and must be used exclusively with one of the Z-Wave

devices listed above. It is not designed for stand-

alone use to control an electrical load. It does not

have Z-Wave functionality and does not act as a

repeater in your Z-Wave control network.

This switch communicates with the Z-Wave enabled

switch through the traveler wire, providing manual On/Off/

Dim control of the connected lighting (through the active

Z-Wave switch) and synchronization of the lighting status

(On/Off/Dim level) between the switches.

There are no user serviceable parts in this unit.

1 2 3 4 5 6 7 ... 15 16

Pas de commentaire

Ge 45610WB GE Z-Wave Add On Auxiliary Switch Manuel d'utilisateur Page 2