Ge JT1000SFSS Manuel d'utilisateur télécharger pdf (Page 12)

49-80677-3

CARE AND CLEANING

Maintenance

SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical

power to the oven at the main fuse or circuit breaker panel. Failure to do so may result in

electric shock or burn.

WARNING

BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot

glass with bare hands or a damp cloth can cause burns.

CAUTION

Oven Light Bulb

NOTE: The glass cover should be removed only when

cold. Wearing latex gloves may offer a better grip.

Before replacing the bulb, disconnect electrical power to

the oven at the main fuse or circuit breaker panel. Let

the bulb cool completely before removing it. For your

safety do not touch a hot bulb with a damp cloth. If you

do the bulb may break.

To remove:

Turn the glass cover counterclockwise 1/4 turn until the

tabs of the glass cover clear the grooves of the socket.

Remove the bulb.

To replace:

Put in a new 40-watt appliance bulb. Place the tabs of

the glass cover into the grooves of the socket. Turn the

glass cover clockwise 1/4 turn.

NOTE:

 A 40-watt appliance bulb is smaller than a standard

40-watt household bulb.

 Reconnect electrical power to the oven once the new

bulb is installed.

 For improved lighting inside the oven, clean the glass

cover frequently using a wet cloth. This should be

done when the oven is completely cool.

Bulb

Socket

Tab

Max

length

ø2”

Glass cover

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Pas de commentaire

Ge JT1000SFSS Manuel d'utilisateur Page 12