Ge PGP966DETBB Manuel d'utilisateur télécharger pdf (Page 10)

Installation Instructions

COOKTOP BURNERS

IT] ASSEMBLING THE COOKTOP

BURNERS

The electrode of the spark igniter is exposed. Be

careful not to push any cooktop controls while the

top of the burner is removed.

Do not remove the top or touch the electrode

of any burner while another burner is turned on.

Electrical shock might result.

H Replace the burner head onto the burner

base, making sure that the head is properly

oriented over the burner base and the

electrode. Make sure to place

the correct burner head on the correct burner

base and that the burner head sits level on

the burner base. The burner heads are not

interchangeable.

E Place the burner

caps on the burner

heads, making sure

to place the correct

burner cap on the

correct burner

head. The burner

caps are not

interchangeable.

Make sure that the

burner caps are

properly seated on

the burner heads.

Burner cap properly seated

Burner cap not properly seated

E Make sure the pins in

the burner heads

match the burner

base indentations

and that they are

properly seated in

them by rotating the

heads until they are

level.

Make sure the slot in

the burner head

is positioned

over the

electrode. The

burner cap has

three to four

pins. When

replacing the

cap, make

sure none of

the pins sits

in the stability

chamber.

Burner cap

Locator

pins

Electrode

Pin

Indentations

Burner cap

Burner base

Make sure the hole

in the burner head

assembly is positioned

over the electrode and

that the burner head is

fully inserted inside the

burner base. A small

gap between the base

and head is normal.

Burner cap

Burner head

assembly

Electrode

Burner

base

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Commentaires sur ces manuels

Pas de commentaire