Ge ZET938SMSS Manuel d'utilisateur télécharger pdf (Page 15)

15

Installation Instructions

B4

Three-Conductor Branch

Circuit Connection

When connecting to a three-conductor branch

circuit, if local codes permit:

a. Connect the bare oven ground conductor

with the crimped neutral (white) lead to

the branch circuit neutral (white or gray

in color), using a wire nut.

b

.

Connect the oven red lead to the branch

circuit red lead in accordance with local

codes, using a wire nut.

c. Connect the oven black lead to the branch

circuit black lead in accordance with local

codes, using a wire nut. If the residence

red, black or white leads are aluminum

conductors, see WARNING on page 14.

d. Install Junction Box Cover.

B3

New Construction and

Four-Conductor Branch

Circuit Connection

• When installing in new construction, or

• When installing in a mobile home, or

• When installing in a recreational vehicle, or

• When local codes do not permit grounding

through neutral:

a. Cut the neutral (white) lead from the crimp.

Re-strip the neutral (white) lead to expose

the proper length of conductor.

b.

Attach the appliance grounding lead (green

or bare copper) in accordance with local

codes. If the residence grounding conductor

is aluminum, see WARNING on page 14.

c.

Connect the oven neutral (white) lead to

the branch circuit neutral (white or gray)

in accordance with local codes, using a

wire nut.

d. Connect the oven red lead to the branch

circuit red lead and the oven black lead to

the branch circuit black lead in accordance

with local codes, using wire nuts. If the

residence red, black or white leads are

aluminum conductors, see WARNING

on page 14.

e. Install Junction Box Cover.

Ground

Wire

Junction Box

Cover

Junction Box

Cover

Ground and

Neutral Wires

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Commentaires sur ces manuels

Pas de commentaire