Ge ZSC1001KSS Manuel d'utilisateur télécharger pdf (Page 9)

Installation

INSTALL SIDE TRIM

FOR 30" CABINET INSTALLATION ONLY. SKIP

THIS STEP IF YOU HAVE 27" WIDE CABINETRY.

• Open the oven door.

• Hang the side trim pieces on the tabs behind the

oven flange.The screw holes in the side trim should

align with the holes in the oven flange.

• Check to be sure the oven is pushed back into the

opening and against the cabinet frame.

STEP 3

INSTALL MOUNTING

SCREWS

• Drill pilot holes through the side flanges, 2 on each

side.

• Drive the color matched screws into the side flange

(and side trim, if applied).

STEP 4

FINALIZE INSTALLATION

• Turn power on at the source. The interior light

should come on when the door is opened.

• Refer to the Owner's Manual for operating

instructions.

STEP 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Pas de commentaire

Ge ZSC1001KSS Manuel d'utilisateur Page 9