GE 28041xx1 Manuel d'utilisateur télécharger pdf (Page 53)

Answering System Display Messages

The following messages show the status of the answering system or help you set up

and use the system.

0-59 Indicates the total number of messages.

CL (blinking) The voice time/day stamp needs to be set.

- - Answering system is turned off.

An (blinking) The system is answering a call.

F (blinking) Answering system memory is full.

Six bars (blinking) The system is recording a memo.

A1 or A2 (blinking) The system is recording an announcement.

LA (Line Access) External line remote answering system.

Handset Sound Signals

Signal Meaning

A long warbling tone (with ringer on) Signals an incoming call

Three short beeps Page signal

One long beep Conrmation tone for the

completion of a function

One short beep (during room monitoring mode) Ring alert tone

One short beep (every 7 seconds) Low battery warning

Troubleshooting Guide

Telephone Solutions

No dial tone

• Check and repeat installation steps:

Ensure the base power cord is connected to a working electrical outlet .

Ensure the telephone line cord is connected to the base and the wall jack.

• Connect another phone to the same jack; if there is still no dial tone, the problem

might be your wiring or local service.

• The handset may be out of range of the base. Move closer to the base.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 61 62

Pas de commentaire

GE 28041xx1 Manuel d'utilisateur Page 53