GE InfoLink 00018937 Manuel d'utilisateur télécharger pdf (Page 45)





Unit beeps

• Clean charging contacts on cordless handset.

• See solutions for No dial tone.

• Replace the battery.

Memory Dialing doesn’t work

•

Did you program correctly?

• Did you follow proper dialing sequence?

Handset displays SEARCHING or NOT REGISTERED and cannot link up with the base

when the T

ALK/CALL BACK button is pressed.

• Handset may be out of range of the base. Move closer to the base.

• Make sure the power adaptor is properly installed.

• Disconnect the handset battery and plug it in again. Place the handset on the

cradle for at least 2 to 3 minutes.

•

Disconnect the power adaptor and plug it in again. Then place the handset on the

cradle for at least 2 to 3 minutes.

Handset displays NOT REGISTERED

•

Follow the programming in the telephone procedures to re-register the handset to

the base.

•

Press the SELECT button to begin handset registration. Follow instructions on

Handset screen.

Registration did not work

•

Charge the batteries for 16 hours.

• Uplug and then plug in the power adaptor.



No Display

• Charge or replace the batteries.

• Make sure that the unit is connected to a non-switched electrical outlet. Disconnect

the AC power adaptor from the base and reconnect it.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52

Pas de commentaire

GE InfoLink 00018937 Manuel d'utilisateur Page 45