Ge 97990 GE Wireless Optical Mouse for PCs Manuel d'utilisateur télécharger pdf (Page 4)

CONNECTING YOUR MOUSE

1. Disconnect the existing mouse.

2. Connect the receiver’s USB plug to the USB Port on your

computer.

3. Place the receiver 8” (20cm) from any other electronic device

such as your computer and monitor.

4. Install the included 2 AA batteries into the battery compartment

located on the bottom of your mouse. Position the batteries

according to the diagram in the battery compartment.

5. Turn on your computer and start your Operating System.

6. Place your Wireless Optical Mouse within 3 feet (approximately 1

meter) of the receiver for optimal communication.

7. Move the mouse to ensure there is a good connection.

8. If the mouse does not work, you may need to link your mouse.

See the Trouble Shooting section for instructions.

2 AA Batteries

Link Button

On / Off Switch

Low Batter

LED

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Ge 97990 GE Wireless Optical Mouse for PCs Manuel d'utilisateur Page 4