GE EAMD Guide d'installation télécharger pdf (Page 2)

WIRING

NOTE: Make all electrical connections in accordance with the

National Electrical Code and any applicable local code requirements.

Strain relief for incoming power must be provided in the pole top by

customer.

Note: Verify that supply voltage is correct by comparing it to name-

plate on xture or carton.

Connect luminaire lead wires to supply wire. Connections are to be

made in interior of pole. Connect black lead to L1, white lead to neu-

tral or L2, green lead to ground. A wiring diagram is provided on a

label inside luminaire for reference.

MAINTENANCE

To maintain high eciency of lens, occasional cleaning outer lens sur-

face may be needed with frequency dependant on local conditions.

Use a mild soap or detergent, which is essentially neutral pH (pH ap-

proximately 6 to 8), non abrasive, and which contains no chlorinated

or aromatic hydrocarbons. Wash thoroughly, using a soft cloth. Rinse

with clean, cold water and wipe dry.

35-201578-177 (11/09)

GE Lighting Solutions is a subsidiary of the General Electric Company. Evolve and other trademarks belong to GE Lighting Solutions. The GE brand and logo are trademarks of the General Electric Company.

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 6 9 4 3 5 3 3- - -- 8 8 8

1 2

Commentaires sur ces manuels

Pas de commentaire

GE EAMD Guide d'installation Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Non GE EAMD