GE EAMD Guide d'installation télécharger pdf (Page 3)

MAINTENANCE / CLEANING

• Tomaintainhigheciencyofthelens,occasional

cleaning of the outer lens surface may be needed,

with frequency dependant on local conditions.

• Use a mild soap or detergent, which is essentially

neutral pH (pH approximately 6 to 8), non abrasive,

and which contains no chlorinated or aromatic

hydrocarbons.

• Wash thoroughly, using a soft cloth.

• Rinse with clean, cold water and wipe dry.

WARNING

Risk of electric shock.Makecertainpowerisobefore

attempting any maintenance.

STORAGE

• Prior to installation, units should NOT be stored

outside in corrugated boxes (cardboard boxes) alone.

• Untilinstallation,allunitsshouldbeplacedina

covered dry storage area. The storage area should

not exceed -40°C (-40°F) to 50°C (122°F).

- This can be preferably in a roofed area or with a

tarp that is secured in such a way to keep water

  oofthecorrugatedboxes(cardboardboxes).

These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in

connection with installation, operation or maintenance. Should further information be desired or should particular problems arise which are not

coveredsucientlyforthepurchaser’spurposes,themattershouldbereferredtoGELighting.

GELighting•1-888-MY-GE-LED(1 - 888 - 69 - 43 - 533)•www.gelighting.com

GE Lighting is a subsidiary of the General Electric Company. Evolve and the GE brand and logo are trademarks of the General Electric Company.

35-201578-177 (Rev. 10/22/13)

English

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

GE EAMD Guide d'installation Page 3