GE EL Series Guide d'installation télécharger pdf (Page 1)

Lighting

Installation Guide

imagination at work

(EL Series – Cable Suspension Surface Mount Driver)

Lumination

™

Linear Suspended LED Luminaire

BEFORE YOU BEGIN

Read these instructions completely and carefully.

WARNING/AVERTISSEMENT

RISK OF ELECTRIC SHOCK

• Turn power off before inspection, installation or removal.

• Properly ground electrical enclosure.

RISK OF FIRE

• Follow all NEC and local codes.

• Use only UL approved wire for input/output connections.

Minimum size 18 AWG (0.82 mm

RISQUES DE DÉCHARGES ÉLECTRIQUES

• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.

• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation électrique.

RISQUES D’INCENDIE

• Respectez tous les codes NEC et codes locaux.

• N’utilisez que des ls approuvés par UL pour les entrées/sorties de

connexion. Taille minimum 18 AWG (0.82 mm

Save These Instructions

Use only in the manner intended by the manufacturer.

If you have any questions, contact the manufacturer.

Important

Wear work gloves to prevent dirt and oil from being

transferred to the luminaire.

Tools and Components Required

• #2 Philips head screwdriver

• UL Recognized wire connectors

• UL Recognized outlet box 2”x4”

• Ceiling fasteners (3 sets)

CAUTION

RISK OF DAMAGE:

• Luminaire may fall down if not installed properly

• Remove protective lm on Light Guide only after installation

• Do not touch Light Guide to avoid dirt, oil and ngerprints

Prepare Electrical Wiring

Electrical Requirements

• The LED driver must be supplied with 120-277 VAC,

50/60 Hz (in 120-277V application).

• For Series EL0XD, the unit must be supplied with

347 VAC, 60 Hz (in 347V application).

• Connected to an individual properly grounded

branch circuit, protected by a 15 or 20 ampere

circuit breaker. Use min. 75°C supply conductor.

Grounding Instructions

• The grounding and bonding of the overall system

shall be done in accordance with National Electric

Code (NEC) Article 600 and local codes.

1 2 3 4

Résumé du contenu

Page 1 - Lumination

GELightingInstallation Guideimagination at work(EL Series – Cable Suspension Surface Mount Driver)Lumination™ Linear Suspended LED LuminaireBEFORE YOU

Page 2 - Top view

Screw Holes Position On Ceiling For Mounting Driver BoxSide viewTop view550 mm (21.7 in.)5 mm (0.2 in.) 5 mm (0.2 in.)3 mm (0.1 in.)Dimming control wi

Page 3 - Luminaire Installation

Luminaire Installation3 456Wear work gloves to prevent dirt and oil from being transferred to the luminaire.12Take out driver box from packaging. Pull

Page 4 - LED Driver

71Connect the ground wire from front cover to the ground screw on the top plate. (Other wires hidden for clarity).Put inter connector on the top of tw