GE EWS2 Guide d'installation télécharger pdf (Page 3)

STORAGE

• Prior to installation, units should NOT be stored

outside in corrugated boxes (cardboard boxes) alone.

• Until installation, all units should be placed in a

covered dry storage area. The storage area should

not exceed -40°C (-40°F) to 50°C (122°F).

- This can be preferably in a roofed area or with a

tarp that is secured in such a way to keep water

o of the corrugated boxes (cardboard boxes).

MAINTENANCE / CLEANING

• To maintain high eciency of the lens, occasional

cleaning of the outer lens surface may be needed,

with frequency dependant on local conditions.

• Use a mild soap or detergent, which is essentially

neutral pH (pH approximately 6 to 8), non abrasive,

and which contains no chlorinated or aromatic

hydrocarbons.

• Wash thoroughly, using a soft cloth.

• Rinse with clean, cold water and wipe dry.

WARNING

Risk of electric shock. Make certain power is o before

attempting any maintenance.

GE_GEH6014A_AreaLighting_LED_Evolve_EWS1_Installation_FINAL_EngFreSpaPort_091113.indd 3 9/11/2013 9:37:16 AM

1 2 3 4 5 6 7 8 ... 15 16

Pas de commentaire

GE EWS2 Guide d'installation Page 3