GE GS Series Guide d'installation Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
Squeeze the two tray clips to release the geartray.
4
Lift geartray from housing.
5
Remove one or two of the end plug(s) as needed
to wire the unit to the AC line.
6
Install a water-tight tting (be sure to install the
tting washer) and feed the AC line wire through
the tting.
Push down until clips
click into place
AC line
Squeeze to release
7
Connect the AC line to the black (line) and white
(neutral) input wires of the LED driver using
14-18AWG twist-on wire connectors. Connect the
ground wire to the green grounding screw.
8
Reattach the geartray making sure the two tray
clips are properly engaged.
9
Vue de la page 2
1 2 3 4

Commentaires sur ces manuels

Pas de commentaire