GE Medium Square Guide d'installation Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
MOUNTING
3
WARNING
Risk of injury or damage. Unit will fall if not installed
properly. Follow installation instructions.
HANDLING
2
This luminaire has been properly packed so that no
parts should have been damaged during transit.
• Inspecttoconrm.
• Thecartonshouldcontainaluminairecompletewith
mounting assembly.
• NOTE: Be careful not to impact or scratch the lens.
Damage may occur if luminaire is improperly handled
outside of pack.
Do not impact or stack luminaire after removal from
packaging.
UNPACKING
1
A. Rigid Pendant Mounting
•
Thread pendant conduit into top housing (Figure 1) or
mounting hub nut.
• Loosen4lensscrewsandremoverefractor.
Loosen two inner plate screws and remove inner
plate.
• Feedwiresthroughpendantandintohousing.
• Connectincomingleadstostrippedleadsusing
connectors rated 90 °C or more.
• Reassembleinnerplateandrefractor.
• NOTE: To prevent damage, do not to over tighten
screws on lens.
FIGURE 1
Locknut
(By User)
6 Inches
(152 mm)
Cover
Vue de la page 1
1 2 3 4 5 6 7 ... 15 16

Commentaires sur ces manuels

Pas de commentaire