Ge ML2400 Manuel d'utilisateur télécharger pdf (Page 15)

QUICK START GUIDE

MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE QS–11

Several styles of connector are used to terminate the attached to the end of the fiber

cable. The ST and SC connectors shown below, are among the more popular. Ensures that

the UR CPU, switch, and cable have compatible connectors.

FIGURE QS–4: Common Fiber Optic Connectors

QS.4.1 Assigning an IP address to the Multilin Switch

The easiest way to configure the switch is through the WEB interface. The switch has been

shipped with a default IP address of 192.168.1.2 and a subnet mask of 255.255.255.0.

Consult your network administrator to determine if the IP address, subnet mask or default

gateway needs to be modified. In our example test network the valid rang of IP addresses

is from 3.94.247.1 to 3.94.247.254.

The easiest way to assign an IP address and subnet mask is through the switches console

serial port. A diagram of the required cable’s pin-out is shown above. Note that both ends

of the cable are terminated in a DB9 pin female connector. Pins 5 of this cable are

DB9 Female to DB9 Female

Cable Pin-out

Pin 2 Pin 2

Pin 3 Pin 3

Pin 5 Pin 5

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 61 62

Pas de commentaire

Ge ML2400 Manuel d'utilisateur Page 15