Ge DCD330G Manuel d'utilisateur télécharger pdf (Page 16)

Installing the dryer (cont.).

Reversing the Dryer Door Swing

Open the dryer door. Remove the 4 hinge hole

plugs or screws from the left side of door

opening. Place nearby for future installation.

NOTE: You may need a plastic knife to help pull out

the plugs. Be careful not to scratch the paint.

Remove the four screws that secure the door

hinges to the dryer front panel.

NOTE: Remove 1

screw from each of the 2 hinges first. Hold the door

firmly before removing the last 2 screws.

Rotate the door 180° and reinstall the door

hinges to the dryer front panel with the 4 screws.

Install the 4 hinge hole plugs or screws that were

removed in step 1 into the open screw holes on

the right side of the door opening.

Remove 4 screws—one from each hinge first

Customer Service Care and Cleaning

Safety InstructionsInstallation Instructions

1 2 ... 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Ge DCD330G Manuel d'utilisateur Page 16