Ge Monogram ZVC36 Manuel d'utilisateur télécharger pdf (Page 11)

Installation Preparation

TOOLS AND MATERIALS REQUIRED

(NOT SUPPLIED)

Pencil and tape measure

Wire cutter/stripper

Step ladder

Wire nuts

Phillips and flat-blade

screwdrivers

Strain relief

Spirit level

Flashlight

Safety glasses

8″ ducting and

caps as needed

Aluminized

duct tape

1/4″ pivoting

hex socket

REMOVE THE PACKAGING

CAUTION: Wear gloves to protect

against sharp edges.

CAUTION: LIFT THE INSERT SLEEVE

OUT OF THE BOX BY GRASPING THE SIDES.

1. Open hood carton.

2. Remove the liner, foam and cardboard.

3. Remove the tape securing the filters to the insert

sleeve, lift the tabs and remove the filters.

4. Unscrew the 5 nuts securing the damper vent

plate assembly, and remove it from the insert

sleeve. Set the 5 nuts and the damper vent plate

assembly aside, as you will be re-installing it later

in the installation process.

5. Remove the screws attaching the insert sleeve to

the mounting board. Discard the screws.

6. Grasp the insert sleeve by the outside edges, and

lift straight up and out of the carton.

NOTE: Do not lift the insert sleeve by the blower

motor.

7. Remove and properly discard the plastic wrapping.

8. Remove the parts box and other packaging.

Electric drill and

appropriate bits

1″ conduit (for remote

mounting only)

Gloves

3/8″ socket/

nut driver

Knife

Plumb line

Silicone

Needle-nose pliers

Tin snips

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Ge Monogram ZVC36 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs Ge Monogram ZVC36