GE IM5D Manuel du propriétaire télécharger pdf (Page 11)

11

Installation Instructions

REMOVE FREEZER DRAWER CORNER

• Remove the drawer corner piece by pulling

out and up on three tabs while pushing

down on the back of the drawer. Then pull

out the side flange while pulling up on the

corner piece to complete the removal.

REPLACE FREEZER DOOR (Cont.)

• For adjusting freezer door gaps, follow the

instructions in the Owner’s Manual.

• Replace freezer basket onto the slide

brackets and make sure the freezer door

operates and closes freely.

REPLACE FREEZER DOOR

• Pull the lower basket and slide mechanism

to full extension using both hands.

• Remove the basket resting on the slides.

If the basket is full of frozen goods, lift the

basket and set to the rear of the freezer

compartment until after the freezer door is

located on slides.

CAUTION

Lifting Hazard

Freezer door is heavy Use both hands to

secure the door before lifting.

• Lift the freezer door and align the tabs on

the door bracket sides with the square holes

in slide mechanisms.

• Replace the attachment screws and torque

the screws to 65 in-lb.

RE-INSTALL FREEZER DRAWER

• Re-install freezer drawer by placing the rear

drawer wheels onto the top of the track

mounted to the side of the freezer walls. The

front wheels on the freezer drawer should

be on top of the bottom basket sides. Place

the ice bucket in the drawer and push the

drawer into the freezer with the front of

the bucket (see page 10) to the front of the

basket,.

• Make sure:

- The ice bucket does not hit the icemaker

arm and the freezer drawer retracts

completely into the freezer compartment.

- The fill tube extends into the fill cup

opening at the back of the icemaker.

9

10

10

11

Align and insert tab

on Freezer Door

Bracket with slot

on Freezer Slide

Bracket.

NOTE: Place one

side in first and

then align the other

side.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Commentaires sur ces manuels

Pas de commentaire