Ge JV936DSS Manuel d'utilisateur Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 44
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
Care and cleaning of the vent hood.
Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood.
The hood has 2 metal reusable grease
filters.
The metal filters trap grease released
by foods on the cooktop. They also
help prevent flaming foods on the
cooktop from damaging the inside of
the hood.
For this reason, the filters must
ALWAYS be in place when the hood
is used. The grease filters should be
cleaned once a month, or as needed.
To clean the grease filters, soak
them and then swish them around
in hot water and detergent. Don’t
use ammonia or ammonia products
because they will darken the metal.
Do not use abrasives or oven cleaners.
Light brushing can be used to remove
embedded dirt. Rinse, shake and let
them dry before replacing.
To remove:
Grasp the filter handle and pull it up,
forward and out.
To replace:
Hold the filter at the bottom with
the handle.
Place the top end of the filter
against the inside front of the
hood.
Slide it up until it stops and push
the bottom end back until it snaps
into place.
Reusable Metal Grease Filters
Do not use a steel wool pad; it will
scratch the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless
steel cleaner or polish. Always wipe the
surface in the direction of the grain.
Follow the cleaner instructions for
cleaning the stainless steel surface.
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer nearest
you, please call our toll-free number:
National Parts Center
800.626.2002
GEAppliances.com
Stainless Steel Surfaces
4
Vue de la page 3
1 2 3 4 5 6 7 8 9 ... 43 44

Commentaires sur ces manuels

Pas de commentaire