Ge ZV800SJSS Manuel d'utilisateur télécharger pdf (Page 20)

Installation Instructions

UNDER-CABINET INSTALLATION

INSTALL FRAMING FOR HOOD

SUPPORT

IMPORTANT: Framing must be capable of

supporting 100 lbs.

If drywall is present, mark the screw hole locations for

the top mounting brackets. Remove the template.

 Cut away enough drywall to expose 2 vertical studs

at the bracket location indicated on the template.

 Install a horizontal support at least 1” x 6” between

two wall studs at the top bracket installation

location. The horizontal support must be flush with

the room side of the studs. Use cleats behind both

sides of the support to secure to wall studs.

 Reinstall drywall.

Centerline of

Installation

Space

View From Rear

Cleats

1" x 6" Min.

Mounting

Support

Centerline of

installation

space

View from rear

cleats

1” x 6” min.

mounting

support

PREPARE THE HOOD

 Remove the hood from the box. Remove packaging

and tape.

 Remove one screw on each side of the cover on

the electrical panel. Lift off the cover and set aside

with screws.

 Stand the electrical panel upright.

 Align the screw holes in the bottom of the panel

with the holes on the base of the hood at the front

side.

 Install 3 screws provided.

Remove 2 side

cover screws

Electrical

panel

Secure

electrical

panel with 3

screws

Junction box

Inside screw

1 2 ... 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Ge ZV800SJSS Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Cagoules Ge ZV800SJSS