Ge JCB968 Manuel d'utilisateur télécharger pdf (Page 33)

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

Roasting rack

Offset racks

Oven rack

Wipe up heavy soil on the oven

bottom.

www.GEAppliances.ca

Oven Floor

Do not clean the broil element. Any soil

will burn off when the element is heated.

Clean the oven floor with warm, soapy

water.

On some models, the bake element is not

exposed and is under the oven floor. If spillovers,

residue or ash accumulate on the oven floor,

wipe up before self-cleaning.

The convection roasting rack should be

removed from the oven before beginning

the self-clean cycle. Clean with an abrasive

cleanser or steel wool. After cleaning,

rinse the rack with clean water and

dry with a clean cloth.

If your oven is equipped with shiny,

silver-colored oven racks, they should be

removed from the oven before beginning

the self-clean cycle. Clean with an abrasive

cleanser or steel wool. After cleaning,

rinse the racks with clean water and dry

with a clean cloth.

If your oven is equipped with gray

porcelain-coated oven racks, they

may be cleaned in the oven during

the self-clean cycle.

NOTE: The shiny, silver-colored oven racks (on

some models) and the convection roasting rack

may be cleaned in the self-cleaning oven.

However, the racks will darken in color, lose their

luster and become hard to slide if cleaned during

the self-cleaning cycle.

To make the racks slide more easily,

apply a small amount of vegetable oil

to a paper towel and wipe the edges

of the oven racks with the paper towel.

Do not spray with Pam

or other

lubricant sprays.

Oven Racks and Convection Roasting Rack

Painted surfaces include the door,

top of the control panel and the drawer

front. Clean these with soap and water or

a vinegar and water solution.

Do not use commercial oven cleaners,

cleaning powders, steel wool or harsh

abrasives on any painted surface.

Painted Surfaces

Do not use a steel-wool pad; it will scratch

the surface.

Shake bottle well.

Place a small amount of Stainless

Steel Appliance Cleaner on a damp

cloth or damp paper towel.

Clean a small area (approximately

8″ x 8″), rubbing with the grain of

the stainless steel if applicable.

Dry and buff with a clean, dry paper

towel or soft cloth.

Repeat as necessary.

To inquire about purchasing Stainless

Steel Appliance Cleaner, or to find the

location of a dealer or Camco Parts Store

nearest you, please call our toll-free

number:

National Parts Center 1-800-661-1616

www.GEAppliances.ca

Stainless Steel Surfaces (on some models)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Ge JCB968 Manuel d'utilisateur Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Micro-ondes Ge JCB968