Ge 49-80038 Manuel d'utilisateur télécharger pdf (Page 16)

Customer Service Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

Using the self-cleaning oven.

How to Delay the Start of Cleaning

Make sure the clock shows the correct

time of day.

Latch the door.

Turn the Oven Temperature knob

to CLEAN.

On some models, you must push the Oven

Temperature knob in before turning.

Press the START TIME ON/OFF pad.

Press the HOUR and MIN. pads to set

the time cleaning will start.

When the CLEAN light flashes, slide

the latch handle to the left as far as it

will go and turn the Oven Temperature

knob to OFF.

After a Clean Cycle

You may notice some white ash in the

oven. Wipe it up with a damp cloth after

the oven cools.

If white spots remain, remove them with a soap-

filled steel wool pad and rinse thoroughly with a

vinegar and water mixture.

These deposits are usually a salt residue

that cannot be removed by the clean

cycle.

If the oven is not clean after one clean

cycle, repeat the cycle.

■ You cannot set the oven for cooking

until the oven is cool enough for the

door to be unlatched.

■ While the oven is self-cleaning, you can

press the CLOCK pad to display the

time of day. To return to the clean

countdown, press the COOK TIME

ON/OFF pad.

■ If the shelves become hard to slide,

apply a small amount of vegetable oil or

cooking oil to a paper towel and wipe

the edges of the oven shelves with the

paper towel.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Pas de commentaire

Ge 49-80038 Manuel d'utilisateur Page 16