Ge 20620 GE Universal Remote Manuel d'utilisateur télécharger pdf (Page 15)

i. When Learning, do not release the button being Learned until

the green indicator has blinked off for half a second.

j. Avoid learning your original remote Volume/Mute buttons

unless you are sure these operate the same device e.g. some

original DVD remotes include TV Volume/Mute button control

and can be two different types of code.

k. Avoid learning your original remote VCR transport buttons

unless you are sure these operate the same device e.g. some

original TV remotes include VCR button control and can be two

different types of code.

l. If learning the ﬁrst or second buttons for a Mode results in

continuous errors then try the following:

i. End the Learn session by pressing the SETUP key.

ii. Clear out the learned commands for that Mode.

iii. Check the IR transmitters are correctly aligned between the

two remotes (use the IR Transmitter Finder facility).

iv. Adjust the distance between the two remotes to be closer (e.g.

half an inch) or a bit further away (e.g. 2 inches) from each

other.

v. Try learning the original remote for that Mode again.

If problems reoccur with the same button check the original remote

button being learned – does it transmit? Does it operate the target

device? Try learning that button under a different clear Mode. If

it learns okay then it is likely to be a different code type from the

others and cannot be learned under the same Mode.

Tips On Learning, cont.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Ge 20620 GE Universal Remote Manuel d'utilisateur Page 15