Ge 24911-v2 GE Universal Remote Manuel d'utilisateur télécharger pdf (Page 7)

Programming Your Remote, cont.

6. Point the remote at the device. Press

the POWER button—if the device

turns off, no further programming is

required for that device. If the device

does not turn off, return to step 3

and use the next code found in the

code list. Continue this process until

a code for your device is found.

7. Repeat this process for each device

(for example TV, DVD, VCR, CBL ,SAT)

in your home entertainment system

you wish to control. Three devices

can be programmed.

Programming Notes

• If your device does not respond to the remote

after trying all codes listed or your brand is not

listed in the code list, use the Auto Code Search

method to program your remote.

• Sometimes the ﬁrst code that “works” with your

device may operate only a few functions of your

device. There may be another code in the code

list that performs more functions. Try other codes

from the code list for more functionality.

• With the Direct Code Entry method, you can

program any device button to control any device

in your home entertainment system.

For example, you can use the CBL/SAT device

button to control an audio receiver or a DVD,

VCR, etc.

• For combination devices, you may have to enter a

code for each device. For example, for a VCR/DVD

device, you may have to enter a code for the DVD

under the DVD/VCR button and enter a code for

the VCR using a different device button on

the remote.

• Write down the code found to operate your device

for future reference.

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Pas de commentaire

Ge 24911-v2 GE Universal Remote Manuel d'utilisateur Page 7