Ge 45138 Manuel d'utilisateur télécharger pdf (Page 6)

Adding a Signal Repeater

Step 1 - Find an electric outlet

near the Sensor having trouble

communicating with the Control

Center. Make certain the location

is between the Sensor and Control

Center. Plug the Signal Repeater

into the outlet and

press the ‘Test’

button on the side of Signal

Repeater. It will send a test signal

out to the Control Center and the

LED indicator on the Signal

Repeater will ﬂash rapidly for

about one second, then go out.

Step 2 - When the Control Center receives the

Signal Repeater’s test signal, it will ﬂash the green

power indicator. This means a conﬁrmation signal

was sent back to the Signal Repeater. Release

all buttons.

Test

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Ge 45138 Manuel d'utilisateur Page 6