GE JP385 Manuel d'utilisateur Page 28

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 40
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 27
28
INSTALLATION INSTRUCTIONS
Electrical Requirements
CAUTION: FOR PERSONAL SAFETY,
REMOVE HOUSE FUSE OR CIRCUIT
BREAKER BEFORE BEGINNING
INSTALLATION.
This appliance must be supplied with the proper
voltage and frequency, as listed in these
Installalation Instructions, and connected to an
individual, properly grounded branch circuit,
protected by a circuit breaker or time delay fuse.
Proper electrical ratings should be verified with
listing on product’s rating plate. The rating plate
is located on the right-hand side of the exhaust
plenum.
All wire connections must be made in
accordance with local codes and properly
insulated. Check with your local utility for
governing electrical codes and ordinances. In
the absence of local electrical codes, the National
Electrical Code, ANSI/NFPA No. 70–Latest
Edition, governing electric range installations,
must be followed.
A copy of the National Electrical Code can be
obtained by writing to:
National Fire Protection Association
Batterymarch Park
Quincy, MA 02260
Before you begin
Read these instructions completely and
carefully.
Important—Save these instructions for local
inspector’s use.
Important—Observe all governing codes
and ordinances.
NOTE TO INSTALLER—Be sure to leave
these instructions with the Consumer.
NOTE: This appliance must be properly
grounded.
Unless very knowledgeable in the installation
of this product, engage a professional installer.
Tools You Will Need
• Saw
• Flat blade screwdriver
• Electrician’s pliers
• Duct tape
• Measuring tape or scale
• Carpenter’s square
• Wrench or socket set
• Drill and drill bit
• Sheet metal screws
• Junction box
NOTE: Installation of this unit requires 2 people.
Do not attempt to install without assistance.
30 Cooktop (Dimensions for reference only) Unit must be vented to the outside!
5"
Dia.
20-1/2"
19"
3"
21-9/16"
29-7/8"
6"
12-1/4"
28-7/8"
27-1/2"
40"
Long
21
9
16
20
1
2
19
3
5
Dia.
29
7
8
12
1
4
6
27
1
2
28
7
8
Vue de la page 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Commentaires sur ces manuels

Pas de commentaire