GE InfoLink 00018937 Manuel d'utilisateur télécharger pdf (Page 44)









No dial tone

• Check and repeat installation steps:

Ensur

e the base power cord is connected to a working electrical outlet .

Ensure the telephone line cord is connected to the base and the wall jack.

• Connect another phone to the same jack; if there is still no dial tone, the problem

might be your wiring or local service.

•

The handset may be out of range of the base. Move closer to the base.

• Ensure the batteries are installed correctly.

Cannot dial

•

Keypad may be locked. If the Padlock icon is on, press unlock in order to deactivate

and enable the keypad.

No signal icon

•

The handset may be out of range of the base. Move closer to the base.

• Register handset.

Handset does not ring

• Make sure the handset ringer switch is turned ON, this can be done through the

handset setup menu - Sounds - Ring Volume.

•

The handset may be out of range. Move closer to the base.

• You may have too many extension phones on your line. Try unplugging some

phones.

•

Check for dial tone.

No sound from handset

•

Adjust handset volume.

• Check and adjust sound settings.

You experience static, noise, or fading in and out

•

The handset may be out of range of the base. Move closer to the base.

• Make sure base is not plugged into an outlet with another household appliance. If

necessary, relocate the base.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Pas de commentaire

GE InfoLink 00018937 Manuel d'utilisateur Page 44