Ge 206C1559P195 Manuel d'utilisateur télécharger pdf (Page 15)

Figure AA

Dishwasher Installation

STEP 20: REPLACE ACCESS PANEL AND

TOEKICK

In this step you will need the panels and the two

screws set aside in Step 4.

There are two types of screws used. The 8-32 x 1/4"

screws are used at the top of the access panel and

should still be in place. The 10-16 x 3/8" screws are

used at the bottom of the access panel and secure

both the access panel and toekick.

IMPORTANT – Screws are not

interchangeable. To prevent damage to your

dishwasher, use the proper screw in the proper

location. Do not mix screw types or lengths.

• Place the toekick against the legs of the

dishwasher.

• Remove the two 8-32 x 1/4" machine-thread

screws.

• Align the access panel to the dishwasher.

• Select the two 8-32 x 1/4" machine-thread screws

just removed and insert them through the top

holes in the access panel and into the dishwasher

frame.

• Tighten these screws.

• Align the toekick and make sure the bottom edge

is against the ﬂoor.

• Insert and tighten the two 10-16 x 3/8" sheet metal

thread screws, making sure the bottom edge of

the toekick stays in contact with the ﬂoor.

STEP 21: LITERATURE

■ Leave the Owners’ Manual, Installation

Instructions, samples and/or coupons with

consumer.

Tip: Prevent tub damage and reduce sound from

under the dishwasher.

Use the machine-thread screws in the top holes and

the sheet metal-thread screws in the bottom holes.

Make sure the toekick is against the floor.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Pas de commentaire

Ge 206C1559P195 Manuel d'utilisateur Page 15