GE DPSQ495GT Manuel d'utilisateur télécharger pdf (Page 11)

12

Operating Instructions

Tools Needed:

•

Standard # 2 Phillips screwdriver

•

Tape-tipped putty knife

•

Needle-nosed pliers

1

Open the door and remove the

filler plugs opposite the hinges.

2

With the door completely open,

remove the bottom screw from

each hinge on the dryer face.

3

Insert these screws about half way

into the TOP holes, for each hinge,

on the opposite side (where you

removed the filler plugs). Apply

firm pressure to get the screw

started in untapped holes.

4

Loosen the top screw from each

hinge on the dryer face half way.

5

With one hand holding the top

of the door and the other hand

holding the bottom, remove the

door from the dryer by lifting it

UP and OUT.

6

Rotate the door 180°. Insert it

on the opposite side of the open-

ing by moving the door IN and

DOWN until the top hinge and

the bottom hinge are resting on

the top screws inserted in step 3.

7

Remove the remaining screws

from the side of the opening

from which the door was

removed. With these screws

secure each hinge at the bottom.

8

Tighten the two top screws of

each hinge.

9

Reinsert the plastic plugs on

the side from which the door

was removed.

Reversing the Door

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 73 74

Commentaires sur ces manuels

Pas de commentaire