Ge JV247 Manuel d'utilisateur télécharger pdf (Page 8)

PART QUANTITY

Grease Filter only (JV338) 1

Charcoal Filter only 1

(JN327 and RN328)

Grease Filter and Charcoal Filter 2

(JV24X, JV347, JV348 and JV367)

Mounting Screws 4

(8 - 18″ x 3/4″ Phillips pan head)

Exhaust Adaptor 1

(for 3

⁄4″ x 10″ rect. venting)

Exhaust Adaptor Screw 1

(8 - 18″ x 3/8″ Phillips pan head

or hex head)

• If the unit is damaged in shipment, return the unit to the

store in which it was bought for repair or replacement.

• If the unit is damaged by the customer, repair or

replacement is the responsibility of the customer.

• If the unit is damaged by the installer (if other than

the customer), repair or replacement must be made

by arrangement between customer and installer.

DAMAGE – SHIPMENT/INSTALLATION

PARTS INCLUDED

MOUNTING SPACE

NOTES:

• Hood width may be greater than the width of the range

or cooktop, but it may not be smaller.

• Ensure the range or cooktop is installed per

manufacturer’s installation instructions.

• If you are going to vent your range hood to the outside,

see the “Ducting Requirements” section for exhaust duct

preparation.

66″ or more

from the floor

to the top of

the hood

24″,30″ or 36″ to

match cooktop width

30″

min.

Bottom edge of

cabinet needs

to be 30″ or

Pas de commentaire

Ge JV247 Manuel d'utilisateur Page 8