Ge JAS02SNSS Manuel d'utilisateur Page 38

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 88
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 37
Before You Call For Service…
Troubleshooting Tips
Problem Possible Causes What To Do
Oven - All Models
Oven light does not
work
Light bulb is loose or defective. Tighten or replace the bulb.
Switch operating light is
broken.
Call for service.
Oven will not work Plug on range is not completely
inserted in the electrical outlet.
Make sure electrical plug is plugged into a live properly
grounded outlet.
A fuse in your home may be
blown, or the circuit breaker
tripped.
Replace the fuse or reset the circuit breaker.
Oven controls improperly set. See the Using the oven section.
On self-cleaning models, door left
in the locked position.
If necessary, allow the oven to cool then unlock the door.
Food does not bake or
roast properly
Oven controls improperly set. See the Using the oven section.
Rack position is incorrect or the
rack is not level.
See the Using the oven section.
Incorrect cookware or
cookware of improper size
being used.
See the Using the oven section.
Oven thermostat needs
adjustment.
See the Adjust the oven thermostat-Easy to do yourself!
section.
Food does not broil
properly
Oven is not set to BROIL. On models with a temperature knob, make sure you turn
it all the way to the BROIL position. On models with a
BROIL pad, make sure it is turned on.
Improper rack position being
used
See the Broiling Guide.
Food being cooked in a hot pan. Use the broiling pan and grid that came with your range.
Make sure it is cool.
Cookware not suited for
broiling.
Use the broiling pan and grid that came with your range.
Aluminum foil used on the
broiling pan and grid has not
been fitted properly and slit as
recommended.
See the Using the oven section.
In some areas, the power
(voltage) may be low.
Preheat the broil element for 10 minutes.
Broil for the longest period of time recommended in the
Broiling Guide.
Control signals after
entering cooking time
or Self-Clean
You forgot to enter a bake
temperature or cleaning time.
Press the BAKE pad and desired temperature or the CLEAN
pad and desired clean time.
Display flashes “bAd”
then “linE” with a loud
tone.
The installed connection
from the house to the unit is
miswired.
Contact installer or electrician to correct miswire
38
Vue de la page 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 87 88

Commentaires sur ces manuels

Pas de commentaire