Ge IM4A Manuel d'utilisateur télécharger pdf (Page 24)

Installation Instructions

REMOVE THE COVER

Remove the screws holding the left side

of the compressor cover and save them for

reinstallation later. Bend the cover back to

access the compartment.

BEFORE YOU BEGIN

Read each step thoroughly before proceeding.

•

CAUTION – Unplug

the Refrigerator. To eliminate

the danger of electric shock during

installation, you must unplug the

refrigerator from its electrical outlet.

WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS P

Are these the right instructions for your model? Follow the Installation Instructions indicated by

the label on the back of the refrigerator— or

SRQPNML

Flat blade and Phillips

screwdrivers

Pliers

TOOLS YOU WILL NEED

Sharp knife

1/4″ and 5/16″ Nutdrivers

• Fasten the water valve to the cabinet by

inserting the bracket hook on the left inner

side of the compressor compartment. Drive

the hex-head screw (10) from the kit through

the hole in the bracket into the hole on the cabinet.

ATTACH THE WATER VALVE

• Locate the female connector plug (B). Plug

the female connector (B) onto the male terminals

on the water valve (3). Either wire can go on either

terminal.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 135 136

Pas de commentaire

Ge IM4A Manuel d'utilisateur Page 24