Ge IM4A Manuel d'utilisateur télécharger pdf (Page 27)

Installation Instructions

PLUG IN THE ICEMAKER

Holding the icemaker in place, insert the icemaker

power cord plug into the socket on the rear wall,

making sure the prongs and holes are matched.

Press the plug firmly into the socket. Lock the plug

in place by clipping the restraints onto each side

of the plug. Make sure the restraints click into place.

Make sure the power cord is still in the hook on

the back of the icemaker.

MOUNT THE ICEMAKER

• Lift the icemaker so the fill tube (13) fits in

the fill cup opening (E). Hang the icemaker

on the two mounting screws (C).

Make sure:

• The power cord is still firmly in the socket.

• The fill tube (13) extends into the fill cup opening

on the back of the icemaker. (Check the rear of

the refrigerator to make sure the fill tube has not

been pushed out of the back of the refrigerator).

• The icemaker mounting screws are located in

the uppermost position of the mounting slots.

• The icemaker is level.

THEN SECURELY TIGHTEN THE ICEMAKER

MOUNTING SCREWS.

INSTALL THE ICE BUCKET

Put the ice bucket (9) under the icemaker.

Make sure the icemaker power switch is set to OFF.

ATTACH WARRANTY LABEL

A label (7) is provided with this kit to record the date of

installation for warranty purposes. Apply it to the back

of the refrigerator.

KEEP THIS MANUAL

The warranty for the icemaker is printed in this

manual. Keep this manual with your Refrigerator

Owner’s Manual.

The icemaker installation inside the freezer is now

complete. Continue to the Water Valve Assembly

section.

INSTALL THE ICEMAKER FILL CUP

Install the icemaker fill cup (side-mounted) (15)

into the icemaker as shown.

Hook

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 135 136

Commentaires sur ces manuels

Pas de commentaire

Ge IM4A Manuel d'utilisateur Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Congélateurs Ge IM4A