Ge 21029 Manuel d'utilisateur télécharger pdf (Page 29)

NOTE: When you complete the deregistration process, “HANDSET NEEDS

REGISTRATION” shows in the display. To use the handset, you must

Global De-registration

If one or more handsets becomes lost, you should de-register all handsets

to ensure proper system operation. Follow the steps below to deregister all

handsets at the same time.

WARNING: It is not recommended that a handset be de-registered

unless absolutely necessary because once a handset is de-registered, that

handset’s telephone features cannot be used until the handset is re-

registered.

NOTE: Before starting global de-registration procedure, let all handsets sit

idle for 20 seconds.

1. Press and hold the PAGE button on the base until the in use/charging

indicator on the base ﬂashes.

2. Press and hold the PAGE button on the base again until the in use/

charging indicator on the base ﬂashes rapidly.

3. Press and release the PAGE button on the base once. All handsets are de-

registered and HANDSET NEEDS REGISTRATION shows in the display.

Default Setting

As you become familiar with this system, you may prefer to use the

system’s original settings. Follow the steps below to return to the factory

default settings.

1. Make sure your phone is OFF (not in talk mode).

2. Press the mute/prog button to go to the main menu.

3. Press cid/vol ( or ) button to scroll to HANDSET SETUP.

4. Press mute/prog button to conﬁrm.

5. Press the cid/vol ( or ) button to scroll to the DEFAULT

SETTING menu.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 115 116

Pas de commentaire

Ge 21029 Manuel d'utilisateur Page 29