GE JVM140H Manuel d'utilisateur télécharger pdf (Page 17)

Clean

off the grease and dust on

hood surfaces often. Use a warm

detergent solution. About 1

tablespoon of ammonia maybe

added to the water. Take care not

to touch the filters and enameled

surfaces with this. Ammonia will

tend to darken metal.

Cooktop

Light/Night Light

Oven Light

REMOVE SCREW

To replace

combination

cooktop

light/night light, first disconnect

power at main fuse or circuit

breaker panel or pull plug.

Remove screw on right side of

light compartment cover and

lower cover until it stops.

I

Be sure bulbs to be replaced are

cool before removing. Break the

adhesive seal by gently unscrewing

the bulbs. Replace with 40-watt

incandescent bulbs

(WB2X4253)

available from your GE supplier.

High intensity 40-watt bulbs

(40SllN/1)

which are available in

supermarkets and hardware stores

may also be used for replacements.

Raise light compartment cover and

replace screw. Connect electrical

power to microwave oven.

To replace

your oven light, first

disconnect power at main fuse

or circuit breaker or pull plug.

Remove the top

grill

by taking off

3 screws which hold it in place.

Next, remove the single screw

located above door near center

of oven that secures light housing.

Replace burned-out bulb with

30-watt incandescent bulb

(WB2X4235) available from your

GE supplier. Secure light housing

with screw.

17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire