GE JVM2052 Manuel d'utilisateur télécharger pdf (Page 20)

Installation Instructions

AFTER: Fan Blade

Openings Facing

Forward

ADAPT MICROWAVE OVEN

BLOWER FOR RECIRCULATION

Carefully pull out the blower unit. The wires

will extend far enough to allow you to adjust the

blower unit.

Roll the blower unit 90° so that fan blade openings

are facing toward the front of the microwave oven.

Roll

Remove and save 3 blower plate screws

and 2 blower unit mounting screws.

NOTE: Make sure wires remain routed in the grooves

of the motor frame.

BEFORE: Fan Blade

Openings Facing Up

Place the blower unit back into the opening.

WARNING: Risk of electric shock can

cause injury or death. Do not pull or stretch the

blower unit wiring. Make sure the wires are not

pinched.

Reattach the blower plate to the microwave oven.

Attach with the 3 blower plate mounting screws

and then the 2 blower unit mounting screws.

Back plate

Blower unit

mounting screw

(2 screws)

Blower plate

Blower unit

Blower plate

mounting screw

(3 screws)

Back plate

Blower unit

mounting screw

(2 screws)

Blower plate

Blower unit

Blower plate

mounting screw

(3 screws)

1 2 ... 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

GE JVM2052 Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Fours GE JVM2052