Ge 800-EFM Manuel d'utilisateur télécharger pdf (Page 13)

Installing Your External Paging Adapter

Step 6: Adjust Speaker Volume to Desired Level

1 Listen to Speaker Volume

At the System phone nearest the External

Paging Adapter, make an announcement

through that external speaker (see page 10 for

instructions on doing this). Listen to the vol-

ume of your announcement through the speak-

er, or ask someone else to make the

announcement while you listen to the volume

level.

2 Adjust the Volume of the Speaker

Use the volume control knob on the amplifier to

achieve your desired speaker volume. Note

that if your speaker has a built-in amplifier, the

volume control knob may be on the speaker

itself.

3 If Necessary, use the Feature

Module’s Volume Control Knob

If you find that you cannot achieve the desired

volume level by adjusting the volume of the

amplifier (or self-amplified speaker), then use

the paging volume control on the rear of the

Feature Module. Using a small screw driver,

turn the knob in a clockwise direction to

increase the volume level, or counter-clock-

wise to decrease the volume.

Note: This paging volume control on the mod-

ule is only active when the amplifier is con-

nected to the blue and black terminals.

Amplifier

Volume

800-EFM guide for PDF v1 091102.qxd 9/11/2002 2:40 PM Page 14

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Pas de commentaire

Ge 800-EFM Manuel d'utilisateur Page 13