Ge 800-EFM Manuel d'utilisateur télécharger pdf (Page 25)

Installing Your Door Intercom Adapter

Step 7: Connect Magnetic Door Strike to Wiring Block (Optional)

1 Install Magnetic Door Strike

Please follow the installation instructions that

came with your magnetic door strike.

Note that TMC Corporation does not manufac-

ture magnetic door strikes. The Door Intercom

Adapter has been designed and tested to be

compatible with industry standard magnetic

door strikes, which are also called magnetic

door locks. Nutone is one example of a com-

pany that supplies magnetic door strikes.

2 Connect Magnetic Strike Wires to 12-

Volt Supply and to Wiring Block

Connect one magnetic strike wire to one of the

indicated screw terminals on the wiring block.

Note that these are the terminals with the yel-

low wire and the green wire.

Connect the other magnetic strike wire to one

terminal of a 12-volt DC power supply, which

you must provide.

Last, connect a wire from the other terminal of

the 12-volt power supply to the other indicated

screw terminal on the wiring block.

PLEASE NOTE THAT YOU MUST CONNECT

A 12-VOLT POWER SUPPLY IN ORDER FOR

YOUR MAGNETIC DOOR STRIKE TO FUNC-

TION. Please consult the instructions that

came with your magnetic door strike for exact

power specifications and amperage require-

ments.

12-volt DC power supply

800-EFM guide for PDF v1 091102.qxd 9/11/2002 2:40 PM Page 31

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Pas de commentaire

Ge 800-EFM Manuel d'utilisateur Page 25