Ge PGP953DETWW Manuel d'utilisateur télécharger pdf (Page 8)

Care and cleaning of the cooktop.

Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.

How to Remove Protective Shipping Film and Packaging Tape

Carefully grasp a corner of the protective

shipping film with your fingers and slowly peel

It from the appliance surface. Do not use any

sharp Items to remove the film. Remove all of the

film before using the appliance for the first time.

To assure no damage is done to the finish of

the product, the safest way to remove the

adhesive left from packaging tape on new

appliances is an application of a household

liquid dishwashing detergent. Apply with a soft

cloth and allow to soak.

NOTE: The adhesive must be removed from

all parts before using the cooktop. It cannot be

removed if it is baked on.

Control knobs

The control knobs may be removed for easier

cleaning.

Make sure the knobs are in the OFF positions

and pull them straight off the stems for

cleaning.

Pull the knob straight up off the stem.

The knobs can be cleaned in a dishwasher or

they may also be washed with soap and water.

Make sure the insides of the knobs are dry

before replacing.

Replace the knobs in the OFF position to

ensure proper placement.

Porcelain Enamel Surfaces (on some models)

The porcelain enamel finish is sturdy but

breakable if misused. This finish is acid-

resistant. However, any acidic foods or food

with high sugar content spilled (such as fruit

juices, tomato or vinegar) should not be

permitted to remain on the finish.

If acids spill on the cooktop while it is hot, use

a dry paper towel or cloth to wipe it up right

away. When the surface has cooled, wash with

an all-purpose cleaner and water. Rinse well.

For other spills such as fat spatterings, wash with

soap and water or an all-purpose cleaner after

the surface has cooled. Rinse well. Polish with a

dry cloth.

NOTE: For stainless steel cooktops refer to the

Stainless steel surface section

Stainless Steel Surfaces (on some models)

Do not use a steel wool pad; it will scratch the

surface.

IMPORTANT: APPLY A PROTECTIVE COAT

OF CERAMA BRYTE^ PART# WB02T10111

STAINLESS STEEL BRIGHTENER BEFORE USING.

This will help you to maintain the brightness

and appearance of your stainless steel range.

■ In order to avoid any discolorations and/or

grease stains, we recommend cleaning and

removing any spills, spots and grease from

the range after use.

■ It is important to use a soft cloth or paper

towel every time the range is cleaned to

avoid any scratches.

Read carefully the instructions on the back of

the Brightener for better results.

Cleaning Instructions:

1. Remove grates.

2. Wash using warm, soapy water:

Wet soft cloth or paper towel (avoid using

excessive water).

Wipe the surface in the direction of the grain

(following the steel lines).

Rinse and wring out a soft cloth or paper

towel and dry the range.

3. Apply a degreaser that does not contain

sodium hydroxide or stainless steel cleaner

(follow instructions).

4. Apply Cerama Bryte® Stainless Steel

Brightener (follow instructions).

5. Repeat steps 2-4 as many times as needed.

6. Put grates back in place.

Follow these instructions for any stainless steel

surface on your range.

DO NOT USE for cooktop or stainless steel

parts cleaning:

• Caustic lye (sodium hydroxide) or cleaners

containing this chemical

• Hard or steel wool pads

• Abrasive materials or chemicals

To inquire about purchasing stainless steel

appliance cleaner or polish, or to find the

location of a dealer nearest you, please call our

toll-free number:

National Parts Center 800.626.2002 (U.S.)

800.661.1616 (Canada)

GEAppliances.com (U.S.)

www.GEAppliances.ca (Canada)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Ge PGP953DETWW Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Poêles Ge PGP953DETWW