Ge PGP959SETSS Manuel d'utilisateur télécharger pdf (Page 9)

Installation Instructions

COOKTOP BURNERS

IT] ASSEMBLING THE COOKTOP BURNERS

The electrode of the igniter is exposed. Be careful not to turn on any cooktop controls

while the top of the burner is removed. Do not remove the top or touch the electrode

of any burner while another burner is turned on. Electrical shock might result.

TT~rTTTT

Burner cap properly seated

Place the burner head onto the burner base. Make sure to place the correct

burner head on the correct burner base and that the burner head sits level on

the burner base. The burner heads are not interchangeable. Ensure the slot in

the burner head is positioned over the electrode and that the burner head is

fully inserted inside the burner base. A small gap between the base and head is

normal.

Place the burner caps on the burner heads, making sure to place the correct

burner cap on the correct burner head. The burner caps are not ' |

interchangeable. Each cap has three to four pins. Make sure that the burner Burner cap not proper yseate

caps are properly seated on the burner heads and that none of the pins sit in the stability chamber.

jrTTTTl

Burner cap

Inner

Burner cap

Burner

head

Electrode

Burner

base

\Y\ CHECK IGNITERS

Operation of the electric igniters should be checked after the cooktop and supply line have been carefully

checked for leaks and the cooktop has been connected to the electrical power.

On models so equipped, check to be sure the cooktop is in the UNLOCKED position.

E Push and turn a burner valve to the LITE position. All spark igniters will make a series of sparks (ticking

sounds), but only the burner turned to LITE will light.

• The burner should light when gas is available to the burner.

• Once the burner lights, it should be turned out of the LITE position.

E Try each valve separately until all burners have been checked.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Pas de commentaire

Ge PGP959SETSS Manuel d'utilisateur Page 9