GE GPF525C Manuel d'installation Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
STEP 1: CUT 1/4" THICK CUSTOM PANELS TO SIZE
• Cut door panel to the dimensions shown.
NOTE: The trim provided will conceal the cut edges of the
panels.
STEP 2: REMOVE TOEKICK ASSEMBLY
• Make sure electrical power to the dishwasher is turned off.
• Remove the two toekick panel screws and toekick panel. Set
them aside for use in Step 6.
NOTE: Do not remove the insulation behind the toekick.
2












INSTALLATION OPTIONS
This trim kit is designed to accommodate 1/4" thick panels.
A raised panel screwed or glued to 1/4" thick backing can be
used. The raised portion of the panel must be fabricated to
permit clearances for the trim on all sides.
A 3/4” thick custom panel may be installed by routing the top
and sides to 1/4" thickness.















Vue de la page 1
1 2 3 4

Commentaires sur ces manuels

Pas de commentaire