GE AFC111V Manuel d'utilisation et d'entretien télécharger pdf (Page 3)

1. These products are designed for household use.

2. Connect white wire to white lead of disposer with a wire nut. Connect

black wire to black lead of disposer with a wire nut. Connect bare

ground wire to the ground screw. The ground wire should be clamped

and held by a strain relief.

3. Do not use a rigid conduit for the wiring connection.

4. A dedicated acceptable motor switch, with the off position marked, shall

be provided for this disposer at the time of installation. The switch shall

be mounted in sight of the disposer or the sink opening for the disposer

Remove

Bottom Cap

Wire Nuts

Ground Screw

Red Reset Button

To House Current

or Power Cord

Installation Instructions

Operating Instructions Troubleshooting tips

Consumer Support

Safety Instructions

1. Attach a power cord, minimum 18" in length

and not to exceed 36" in length. Use GE Part

Number PM3X215.

2. Wire the disposer directly into the house

current.

1 2 3 4 5 6 7 8 ... 35 36

Pas de commentaire

GE AFC111V Manuel d'utilisation et d'entretien Page 3