GE UVB36DKBB Manuel et guide de l'utilisateur Page 16

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 40
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 15
16
49-80777
Installation Instructions
1
INSTALL DOWNDRAFT VENT
A
Two stabilizing brackets must be installed on
each side of the downdraft vent.
For right-side or straight-down blower
discharge, fasten the stabilizing brackets at
locations A, B, D and E.
For left-side blower discharge, fasten the
stabilizing brackets at locations B, C, D and E.
B
Place the downdraft vent into the countertop
cutout so that the back flange of the vent is
sitting on top of the countertop.
C
Secure the screws for the stabilizing brackets
to the cabinet back and side walls.
D
Confirm the vent system is plumb and square
with the cabinetry.
E
Place Cooktop into the countertop cutout.
There should be a 1/8” minimum gap
between the front of the vent trim and the rear
of the cooktop.
F
Connect duct. Use a roof or wall cap (with
damper) that is intended for use with kitchen
hoods and vent systems.
INSTALLATION INSTRUCTIONS
A
C
A
D
C
B
E
4 to 5”
4 to 5”
Top
Brackets
Bottom
Brackets
Bracket
Cabinet Back
Wall
Downdraft Vent
Location A
TOP VIEW
Level
Level
Vue de la page 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Commentaires sur ces manuels

Pas de commentaire