Ge ML2400 Manuel d'utilisateur télécharger pdf (Page 55)

QUICK START GUIDE

MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE QS–51

Z Enter the path to the folder in which the configuration file will be

stored

Z Select Xmodem as the receiving protocol.

Z Enter a name for the configuration file.

Z Click OK.

The configuration file will be stored at the specified location.

Z Verify that the configuration file has been created and stored

correctly.

This completes the Save (original) Configuration procedure.

The following procedure describes how to upgrade the firmware:

Z If the current firmware is older than 1.7.3, use the upgrade

command:

ML1600/2400# upgrade mode=serial

Do you wish to upgrade the image? [Y or N] Y

See figure below.

Z If the current firmware is older than 1.7.3, use the xmodem

command:

ML1600/2400# Xmodem get type=app

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 61 62

Pas de commentaire

Ge ML2400 Manuel d'utilisateur Page 55