GE JKP27 Manuel d'utilisateur télécharger pdf (Page 16)

Using the self-cleaning oven.

(ovens operated with touch pads)

The oven door must be closed and all controls must be set correctly for the cycle to work properly.

Before a Clean Cycle

The oven must be cool in order to set the self-

clean cycle.

We recommend venting your kitchen

with an open window or using a

ventilation fan or hood during the

first self-clean cycle.

Remove the broiler pan, broiler grid, all

cookware and any aluminum foil from

the oven.

The oven shelves can be self-cleaned, but

they will darken, lose their luster and

become hard to slide.

Do not use abrasives or oven cleaners.

Clean the top, sides and outside of the

oven door with soap and water.

Make sure the oven light bulb cover

(on some models) is in place and the

oven light is off.

IMPORTANT:

The health of some birds

is extremely sensitive to the fumes given

off during the self-cleaning cycle of any

oven. Move birds to another well

ventilated room.

■ On models with touch pad controls

for both ovens, you can set a clean

cycle in both ovens at the same time.

The last oven set will automatically

delay its start until the end of the first

oven’s clean cycle.

■ On models with touch pad controls for

both ovens, you can use timed baking

in one oven and self-clean the other at

the same time.

Wipe up heavy soil on the oven

bottom. (appearance may vary)

How to Set the Oven for Cleaning

Press the

SELF CLEAN

pad.

Using the

HOUR

and

MIN +

–

pads, enter the desired clean time, if

a time other than 4 hours is needed.

Clean cycle time is normally 4 hours.

You can change the clean time to any

time between 3 hours and 5 hours,

depending on how dirty your oven is.

Press the

START

pad.

The door locks automatically. The display

will show the clean time remaining. It will

not be possible to open the oven door

until the temperature drops below the

lock temperature and the

LOCKED

light

goes off.

When the

LOCKED

light is off, open

the door.

■ The word

LOCK

will flash and the oven

control will signal if you set the clean

cycle and forget to close the oven door.

■ To stop a clean cycle, press the

CLEAR/OFF

pad. When the

LOCKED

light

goes off indicating the oven has cooled

below the locking temperature, open

the door.

Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsConsumer Support

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

GE JKP27 Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers GE JKP27