GE EDW3000G02 Manuel d'utilisateur télécharger pdf (Page 4)

165D6290G029

THIS DISHWASHER IS PROGRAMMED WITH A SERVICE MODE TO AID THE TECHNICIAN IN TROUBLESHOOTING THE DISHWASHER.

EACH COMPONENT MAY BE CYCLED TO DETECT IF IT IS FUNCTIONING CORRECTLY. COMPONENTS ARE CYCLED BY PRESSING

KEYPADS TO THE LEFT OF THE START/RESET KEYPAD. USE THE MATRIX BELOW TO DETERMINE HOW TO CYCLE EACH COMPONENT.

MODELS WITHOUT A TURBIDITY SENSOR

Service Mode Test Matrix*

Keypad Description Time in Seconds**

10 Activates Main Pump 120

Activates Auxiliary Pump 60

Activates Drain Solenoid 6

8 Activates Detergent Module 30

7 Activates Water Valve 60

6 Activates Heating Element 120

START/RESET Used to EXIT Service Mode

1098765 3421

NOTE: INDICATES KEYPAD USED ONLY ON SOME MODELS. WHILE THIS KEYPAD MAY

NOT BE VISIBLE, THE INDICATED SPACE SHOULD ALWAYS BE USED AS A KEYPAD.

TO ENTER SERVICE MODE :

PRESS KEYPAD #9 AND KEYPAD #1 SIMULTANEOUSLY FOR

5 SECONDS.

TO EXIT SERVICE MODE :

PRESS THE START/RESET KEYPAD AT ANYTIME TO EXIT.

*NOTE: After 5 minutes of

inactivity, the service mode

will automatically turn off.

**NOTE: When a component

is activated in the SERVICE

MODE, the output will

continue to remain active

(ON) until the Maximum

time has expired or another

keypad is pressed.

N.D. 921-04

1 2 3 4

Pas de commentaire

GE EDW3000G02 Manuel d'utilisateur Page 4