GE GSC1807 Manuel d'utilisateur télécharger pdf (Page 7)

Using the dishwasher. GEAppliances.ca

Check the Water Temperature

Use Jet-Dry

Rinse Agent

Jet-Dry

rinse agent removes spots and prevents new film buildup on your dishes, glasses, flatware,

cookware and plastic.

Filling the Dispenser

The rinse agent dispenser holds 3.5 oz. (99 mL) of rinse agent. Under normal

conditions, this will last approximately one month. Try to keep it full,

but do not overfill.

Make sure the dishwasher door is fully open.

Turn the dispenser cap to the left and lift it out.

Add rinse agent until the indicator window looks full.

Clean up any spilled rinse agent with a damp cloth.

Replace the dispenser cap.

Rinse Aid Setting

The amount of rinse agent released into the final wash can be adjusted.

The factory setting is at the midpoint. If there are rings of calcium

(hard water) spots on dishes, try a higher setting.

To adjust the setting

Remove the dispenser cap; then turn the adjuster counterclockwise

to increase the amount of rinse agent.

The entering water should be at least 120°F

(50 °C) and not more than 150°F (65.5 °C), for

effective cleaning and to prevent dish damage.

Check the water temperature with a candy or

meat thermometer.

Turn on the hot water faucet nearest the

dishwasher, place the thermometer in a glass and

let the water run continuously into the glass until

the temperature stops rising.

Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions

Indicator

Dispenser cap

Adjustable setting

Portable Models

For instructions on how to use the unicouple, please refer to the

Installation Instructions

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

GE GSC1807 Manuel d'utilisateur Page 7